p4newstreet logo

more-commercialsThe above 2 vehicles represent a return for me in a small way in that both come from manufacturers I have used before and in both cases I was a little bit disappointed previously . On the left an Austin A40 from Road transport images who I used before for a dodge cab on New Street. In the case of the dodge cab I felt it was a bit too rounded and didn’t really capture the look of the real thing all that well but I must say I’m much happier with this little van which was an impulse buy at this years Scaleforum. This is one of their all in one kits which is unusual for them as they usually sell all their bits separately so you can build the vehicle you want. Road Transport Images

The Lorry is a Ford Thames from John Day models. In this case my previous experience was with a diesel-powered Transit bus and again I wasn’t all that impressed. This model couldn’t be further from the transit though as its much better cast with very little work to do. I swapped the supports in the bed for wire as they were a tad scruffy and the bed and cab both needed a little bit of evergreen 40thou section to make them fit a little better but I like it! John Day Models

unloved-trackI decided that the track in my little yard looked too neat so I have attacked it with some powder paint (rubbed in with a finger then sealed with Klear) and some weeds. I’m much happier with how it looks now.
loading-gaugeAlthough I don’t have a goods shed I do need a loading gauge. I’m reliably informed that these were used to ensure that wagons leaving the yard were within gauge and not as some sort of protection for goods sheds. The above example is a typical midlands one and started out from the Smiths kit, I filed off the moulded lifting gear and replaced it with some spare handwheels (from Brassmasters) and bits of wire and brass.
weighbridgeI mentioned in the title a first for me and this is it. Not that i’ve never built a weighbridge before (Although I haven’t) but i’ve never actually built a kit building before. When I was a kid my dad built some for me, usually Airfix kits and Linka, but all my buildings have been scratchbuilt up to now. So in the interests of breaking new ground this is a Wills kit. I turned the door over as hinges on the outside indicated it opened outwards which seemed a bit odd to me. I also filed off the panels on the end and rescribed the bricks and fancied a brick-built chimney but it is still a kit building. Oh and the guttering is bits of brass from Eileens!

Finally, you may have spotted earlier that Ive bedded in (most of) the abandoned warehouse, a few pictures follow:abandoned-line warehouse-bedded-in

2 Responses

  1. Chad Bevan

    Looks fantastic! You need a class 25 sitting on that derelict siding towing the obligatory track-removal train. I’m also not certain the debris in the yard is entirely convincing, but that might just be me!

    16/10/2015 at 5:07 am

  2. jim s-w

    Hi Chad, ask and you shall (eventually) receive (click here)

    16/11/2015 at 5:37 pm

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.