p4newstreet logo

Posts tagged “Judith Edge DE2 shunter

One of those finished things posts.

The advantages of working on more than one project at once is that, firstly, I don’t get bored and secondly every so often you seem to finish a lot of things together.  This is one of those instances with several things that have featured recently have reached the finish line sort of together.

loading-gaugeMy loading gauge has been painted for a while but now its been planted too. I love stuff like this as its one of those things that I hope disappears into the scene and becomes unremarkable. Perhaps once in a blue moon someone will notice it but, much like the real thing I like stuff like this just to be ‘there’. It’s not supposed to get people’s attention. (don’t worry about the big gap under the wall – that’s not been permanently attached yet)Thames-and-AustinMy Ford Thames and Austin A40.  The colours of the Austin have a somewhat obvious Birmingham influence. Cartwrights was a furniture store in Brierley Hill but I have no idea if they used Austin vans or even if they had any road vehicles at all. ex-coke-wagonThis was a quick win project – Started life as a Bachmann Coke wagon which I imagined was sold to Round Oak and had the coke rails removed. I just liked it because it had a local livery and i’ve never done a distressed private owner before. The lettering was attacked with one of those brass brush wheels in a mini-drill and then the wagon was weathered. The w-irons needed a but more work with the mini-drill and a burr to get the wheels in but this was really minimal effort modelling! DE2-paint-1And so to the big project of the last few weeks – the DE2 shunter.  I have to admit I didn’t relish the thought of painting its striped livery but by using some 4mm making tape from a company called Jammy Dog it wasn’t too bad at all. (click here for their website)      A few more pictures below.DE2-paint-3 DE2-paint-2coal-emptiesThis is the sort of train I had in mind for the loco – Pushed up the hill with the loco at the rear and no brake van. I will need to add a shunter to the front wagon at some point.

van-train-bwFinally another moody shot of the Jinty heading out of the yard on a train of vans.

Yorkshire Engine DE2 part 1

Part of the plan for Brettell Road is to have an off scene steel works, the real Round Oak was (is) just down the line from the sidings at Moor Street. I plan to use the sidings at Brettell Road as an exchange sidings for this and I like the way that a lot of the uphill workings on the old Earl of Dudley’s railway had the loco pushing trains up from the bottom of the hill so I want to replicate this on the model. My choice of motive power for these workings is the Yorkshire Engine company DE2 0-4-0 diesel shunter, of which Round Oak had a fleet and would be pretty new at the time of the model. Not that the loco’s in such an environment stayed new for very long mind you.  Luckily Judith Edge do a kit and this week I set to work.de2-sub-assembliesThe kit breaks down into 3 sub assemblies. The chassis, the footplate and the body. It all goes together pretty easily due to the good design of the kit. It has a simple rocking compensation built in and I decided to use it as supplied. The above picture shows the main soldering work complete with the fiddly details stage to come next. de2-mock-up-1Losely assembled but not bolted together, I will be getting the chassis running with a high level gearbox and Mashima motor. de2-mock-up-2Rear view. The kit provides a resin bonnet top and sandboxes along with a little cover for the handbrake which is mounted on the rear of the cab on the right hand side under the window. I cant find any evidence for this being on the Round Oak examples so I filled the recess for it with a bit of scrap etch and filed it smooth. You can just make it out in the picture.

There was a suggestion that these loco’s first appeared at Round Oak in a plain Yellow livery but I cant find any evidence for this being the case. If anyone has any it would be much appreciated.